China Carbon Black Pigment, for Paint, Printing Ink, Printing Paste, Plastic, and Rubber, etc

Product Description

Our advantage:
1. Factory price,
2. Good Quality,
3. Free sample,
4. ISO Cerficate,
5. A long stable supplier,
6. Good support to you

````````````````````````````````````````````````````````````````

Other Name: Carbon Black, Black Pigment

Type: N220, N330, N550, N660 ect

CAS No: 1333-86-4

Form: Black granule or powder

Process: Wet or dry process

Physical data:

1. Odor: None
2. PH: 6-8
3. Boiling point: 4200
4. Vapor pressuer: Not applicable
5. Solubility in water: Not applicable
6. Specific gravity: 1.7-2.1
7. Viscosity: Not applicable

Black Carbon Introduction
BLACK CARBON N220
Characteristic: Good abrasion resistance and crack resistance. Its stress at definite elongation is lower.
Typical application: Enhanced carbon black; Tire tread, high quality industrial rubber products and high load
Conveyor belt.
BLACK CARBON N330
Characteristic: Good abrasion resistance and middling lag.
Typical application: Tire belted layer; Tire side; Outer layer of roller; Industrial rubber products; Car tire tread.
BLACK CARBON N550
Characteristic; It boasts the best reinforcing performance among the semi-reinforcing varieties, excellent extruding performance
As well as low resilient rate.
Typical application: Tire body and inner tire compound; Tube; Extruding bar, seal and mould rubber product.
BLACK CARBON N660
Characteristic: It features lower reinforcing ability, smaller structure, higher lips expansion and greater fill amont.
Typical application: Tire body and inner tire compound; Normal mould and extruding application; Monolayer moisture proof
Product

Black Carbon Application
Maily used in various rubber products such as tyres, rubber overshoes, cable, seal ring, tape etc.

Also can be used in relevant industries such as plastic manufacutre

It is mainly used for rubber intensifier and packing, its consumption is about half of rubber rubber consumption of carbon black with carbon black 94% of the total, with approximately 60% for tyre manufacture.

In addition, also used for printing ink, paint and plastic colorants and plastic products BingBiJi of ultraviolet light, as well as important fertilizerFor many other products, such as electrode, dry, resistors, explosives, cosmetics, and polishing compound.

Items Of Black Carbon	N220	N326	N330	N339	N375	N550	N660	N774
Iodine Absorption g/kg	121±7	82±6	82±6	90±6	90±6	43±5	36±5	29±5
DBP Absorption 10 -5 m 3 /kg	114±6	72±6	102±6	120±7	114±6	121±7	90±5	72±5
CDBP Absorption 10 -5 m 3 /kg	92~104	62~74	82~94	93~105	90~102	80~90	69~79	58~68
CTAB Adsorption Surface Area 10 3 m 2 /kg	103~117	74~86	73~85	86~98	89~101	36~48	31~43	26~38
Surface Area 10 3 m 2 /kg	99~113	70~82	69~81	82~94	85~97	34~44	29~39	24~34
Total Surface Area 10 3 m 2 /kg	107~121	72~84	72~84	85~97	86@100	35~45	30~40	25~35
Pigmentation Intensity %	108~124	103~119	96`112	103~119	107~121	-------	-------	--------
Heating Loss ≤%	2.5	2	2	2	2	1.5	1.5	1.5
Ash ≤%	0.7	0.7	0.7	0.7	0.7	0.7	0.7	0.7
Fine powder content ≤%	10	10	10	10	10	10	10	10
45μm Sieve Residue ≤mg/kg	1000	1000	1000	1000	1000	1000	1000	1000
500μm Sieve Residue ≤mg/kg	10	10	10	10	10	10	10	10
Impurity	None	None	None	None	None	None	None	None
Pumping Density kg/m 3	355±40	455±40	380±40	345±40	345±40	360±40	440±40	490±40
300% Elongation Stress Mpa	-1.9±1.5	-3.5±1.5	0.5±1.5	1.0±1.5	0.5±1.5	0.5±1.5	2.2±1.5	3.7±1.5